How To Use Volume Control On Skullcandy Earbuds?

4.6/5 - (7 votes)

Skullcandy earbuds come in various shapes and designs, and they may be wireless or wired. These earphones can be too loud or quiet for many reasons. So, knowing how to use volume control on Skullcandy earbuds is essential when operating with them.

We have compiled two ultimate methods: Manual and software settings that you can use on Skullcandy earbuds and those from other manufacturers. 

Let’s dive right into the details!

How To Use Volume Control On Skullcandy Earbuds?

You can control the volume by using the buttons

You can control the volume by using the buttons

You can access the volume control on Skullcandy earbuds through manual settings or through software settings on your smartphones.

Manual Settings

Depending on the Skullcandy earphones you have, many earbuds enable users to reduce the volume by touching them slowly until they reach the lowest volume. 

Then, repeat the procedure with the other earphones by slowly tapping to increase the volume to their desired level.

Some of them have a three-button system on the charging case, with the top button turning up the volume with just a single push and changing the track with a long hold. 

The center button is responsible for playing and pausing. Depending on the condition of the earbuds, this can also serve as a power button, a connecting button, and a way to access your phone’s AI assistant or accept calls.

The bottom button functions in the opposite way as the top one, thus a single hit lowers the loudness, and a more extended press returns the track.

There are a lot of controls, but there is less room for buttons on an earbud case. Therefore, you don’t usually glance at the controls when you want to hit one, and having fewer buttons is more straightforward to use than having a bunch of them.

Software Settings

Many smartphones have built-in controls that limit the volume of earphones. It is only a precautionary measure, as loud music might harm our ears.

If you want to delete the setting, all you have to do is go into the software settings on your device.

Go to the settings, hit “Sounds and Haptics,” then choose “Headphone Safety” on any iOS device. If “Reduce Loud Sounds” is turned on, turn it off and check your sound.

If you’re using an Android, go to “Settings” and select “Sound” and “Volume.” To get the sound volume you want, use the four sliding choices.

Why Are My Skullcandy Earbuds Too Quiet? 



If your Skullcandy earphones stay quiet after attempting both of these solutions, you have to deal with some different issues. Consider the following:

Blocked Speaker 

Trapped earwax is the primary cause of Skullcandy earphones’ quietness. It may seem terrible, but be assured, it’s a pretty regular occurrence. The usage of earbuds regularly tends to raise earwax production.

Because our ears are designed to self-clean and drive out earwax, wearing earphones prevents this process, and as a result, more earwax ends up in the buds.

The wax inhibits the speaker, and any build-up can substantially impact the sound because it is so tiny. However, you can solve this problem by removing the little silicone protective cover of the earphones. 

Wipe your speaker with a paper until you don’t see any earwax. Check the sound after replacing the tiny rubber tip on the top.

You can rely on the instructions in this video to better understand how to do so.


Socket Problems On Wired Earbuds

Since they are not plugging correctly, or the jack is not clear enough to produce enough music, Skullcandy wired buds can be silent.

Clean out your headphone jack with a Q-tip or anything similar to repair this. Check your sound level and insert the jack firmly into the socket.

Bluetooth Connectivity Problems On Wireless Earbuds

The Skullcandy earphones’ loudness may be affected if the wireless connection isn’t correct. You’ll have to reconnect in this situation. 

Restart your smartphone and wireless earphones, then reconnect the Bluetooth. A simple reconnect usually solves the problem.

Why Is One Earbud Louder Than Another?

Old man listening to music

Old man listening to music 

You can examine the earwax accumulation on both earphones. Ensure that you clean both regularly. If it does not resolve the issue, it may be due to a software malfunction.

There always be a loudness adjuster for Skullcandy earbuds in your system preferences (you can find the menu for your device online). Ensure that the left and right volume levels are equal.

See more:

Final Thoughts

Hopefully, you can better understand how to use volume control on Skullcandy earbuds after reading this article. If you have any questions or ideas about this field. Please feel free to let us know; we are pleased to hear your thoughts.

Thank you for reading!

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x