How To Test Surround Sound Headphones In Windows 10

4.5/5 - (6 votes)

Explore how to test surround sound headphones in Windows 10 in our article today. You will get a detailed guide with other helpful information.


How to test surround sound headphones in Windows 10 to see whether they are functioning properly or not? We will walk you through all the necessary steps to perform the test. There is also a list of some critical parameters that greatly affect your headphone’s audio quality and performance. Let’s check them out!


Can Headphones Have Surround Sound Qualities?

There are two types of headphones: stereo and surround sound headphones. While they are quite similar in appearance and sound to the untrained eye, they are different from each other. The key difference is how they operate. 

Logitech G432 7.1 Surround Sound Headphone

Logitech G432 7.1 Surround Sound Headphone

Surround sound is a technique aimed to enhance the depth and fidelity of sound production by placing multiple audio sources at various angles towards listeners. It makes all sounds coming from the source virtually lifelike. 

In fact, surround sound headphones are basically two large headphone cups housing several small headphones with different audio sources inside. These discrete headphones are responsible for creating a sensation of virtual reality. 

On the other hand, stereo headphones don’t generate a compelling sense of true quality audio. Many headphones with the surround sound mode are often stereo headsets whose audio quality is nowhere near as good as the real ones.

See more:

How To Test Surround Sound Headphones In Windows 10

This section will cover step-by-step instructions on how to test 7.1 surround sound headphones in Windows 10.

Step 1 

Access the Control Panel, choose Hardware and Sound, then select Sound. Or right-click the speaker icon in the taskbar and choose Sounds from the pop-up menu.

Choose Sounds

Choose Sounds

Step 2

Select the tab Playback, and then click on the surround sound headphones you want to test (some PCs will display the name Speakers). Select the default button Configure to test your speaker configuration.

Select Surround Speakers

Select Surround Speakers

Step 3

When the window Speaker Setup opens, choose the surround sound configuration. If you want to check the 7.1 surround sound headphones, choose 7.1 Surround.

Select The Audio Channel You Want To Test

Select The Audio Channel You Want To Test

Step 4

Choose the button Test below the list of audio channels. You can hear a chime played one by one through all speakers in this configuration.The diagram will highlight the speaker being played.

The Speaker C Is Highlighted In The Diagram

The Speaker C Is Highlighted In The Diagram

In case you’d like to stop the process, click the button “Test” again.

For testing individual speakers, select them in the diagram situated on the window’s right side. When you access the speaker, you can hear a chime play through the speaker. As a result, you can figure out whether the speaker is correctly positioned.

Then, you are free to press Cancel or the X button  to close the window and then close the properties of Sound.. Also, you can select Next and then go through a wizard to inform the operating system which speaker you do not have connected, if needed.

What Should You Consider For Performance While Testing Headphones?

There are several important factors to keep in mind when testing the headphones as follows.

Frequency Response

The headphone frequency response measures your headset’s ability to generate the sounds of various frequencies. The graph showing the headphone frequency response is better to be a straight line near its origin.

If the graph is leaning towards its left side, your headphones might have high bass. In contrast, if the graph is favorable on the right, the headphones are likely to provide high treble. To test this factor, you had better ensure to play about 250 tunes of a similar voltage.

Isolation Measurement

The measurement of isolation means your headphones’ capacity to isolate your ears from the ambient noise around you. It is a surround sound experience real test as it lets you analyze how well the headset makes it a lifelike experience. 

We connect a speaker to audio devices playing white noise or pink noise to perform this measurement. It’s preferred if it’s pink noise. Then we put on the headphones and analyze the level of sound that can be heard. 

Most surround sound models available can reduce the surrounding noise to 100Hz.

Impedance Measurement

The impedance means the dynamic resistance that your pair of headphones provide when generating sounds. This factor significantly impacts the headphones’ quality. 

Measuring the impedance is relatively simple. You only need to evaluate  the drop of voltage before and after your headphones play the sound. Modern models generally come with low impedance to make them easier to reach a higher volume level.


So now you know how to test surround sound headphones in Windows 10. By following our steps, you can set up a new surround sound configuration on your PC properly and check if any speaker has not connected to the system. 

One more thing, it is advisable to measure the impedance, isolation, and frequency response when testing your headphones. Anyway, if you have any further questions, please feel free to let us know. Thank you for reading.


0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x