The Detailed Guide On How To Reset Bose Headphones

5/5 - (1 vote)

How to reset Bose headphones? There are several ways to solve your problem. Let’s check this article for step-by-step instructions.

A reset can reboot your device or remove all device settings, reverting the product to its original configuration out of the box. The question is how to reset the Bose Quietcomfort 35 noise cancelling headphones properly? 

Two approaches can work:

  • Soft reset: Turn off the headphones and disconnect the cables.
  • Hard reset: Factory reset.

The soft reset is easier to carry one. It doesn’t affect your default setting. However, if both of the soft resets can’t help, you can try the Factory reset solution. This hard reset can help clear the previous modification in your device.

Now, let’s read on to discover!

How To Reset Bose Headphones? 

The two approaches below are the most straightforward ways to reset your Bose Quietcomfort 35 noise cancelling headphones. Both processes require a USB cable. Remember to have one beforehand. 

Method 1: Turn off the headphones 

To begin, you need to press the power button to turn your headphones on. Then, turn them off and wait for about 30 seconds. Unlike headphones from other bands, one single click can activate the power button in Bose Quietcomfort 35 products. If you press and hold it for a while, you may run the connecting function of your headphones.

Bose QC35 headphones

Click on the power button of your Bose QC35 headphones first

After 30 seconds, get a USB cable to plug in the headphones. This cable is the same as the one you use for charging.

Then, unplug the cable and wait for one minute. 

Finally, your headphones are ready to use. 

Method 2: Disconnect the cables

If the first method doesn’t work, you can try this alternative. This method is also a soft reset that doesn’t change anything in your settings. In other words, your product settings are retained during this reset.

Start by disconnecting the cables from your headphones.

Attach the bigger end of the USB cable to a running computer.

Connect the smaller end of the cable to one earcup. Then, press and hold the power button on your headphones until the LED light blinks twice.

Plug the big and small end of your USB cable to a computer and an ear cup relatively

Plug the big and small end of your USB cable to a computer and an ear cup relatively

After connecting, wait for two seconds, then release the power button. 

See more:

Factory Reset On Bose Quietcomfort Headphones 

The mentioned methods are all “soft reset.” Your product settings are retained. Moreover, they don’t affect the software’s current installation either. 

By resetting the fundamental options of your noise cancelling  headphones, you may go farther than a fundamental reset. Go for the Factory reset, and you can solve your problem.

A factory reset is the hard reset method. It deletes the system’s sources, audio, and network services to factory defaults. 

A factory reset can delete previous settings

A factory reset can delete previous settings

If you want to switch to factory reset, hold the volume button and the AUX buttons at the same time for about 10 seconds. Then, launch the Bose Music player and continue the on-screen directions to reset your device.

In some cases, it is now not possible to access product settings and return to the previous version of your Bose QC35 headphones. As a result, you won’t be able to downgrade the presently selected version.

You may only upgrade the software program. So, if you expect a complete reset of your Bose QC35 noise cancelling  headphones can solve your problem, it’s advisable to consult Bose’s support staff for more assistance.

Learn more tips on fixing the problem with Bose Bluetooth connection. 

When Do You Need To Reset Bose Quietcomfort Headphones? 

Resetting Bose QC35 headphones can help you out of trouble related to headphones connection. Here are some specific cases that you need to reset your equipment. 

  • Your Bluetooth headphones don’t connect with your laptop or headphones. 
  • Your phone can’t detect your wireless headphones.
  • Your phone can detect the headphones, but the two devices can’t pair successfully.
  • Your headsets keep on disconnecting from your phone, although they both are full of battery.
  • You’re listening to music or watching a clip, but the audio keeps delaying.
  • There’s a lot of static in the sound.
  • Even though the headphones are your default device, there is still no sound when you pair the Bluetooth headphones.

Some problems with your Bose wireless headphones require you to reset them.

Some problems with your Bose wireless headphones require you to reset them.

These problems aren’t about the hardware issue. It’s only a connection matter that resetting the noise cancelling  headphones can help.

You may be coping with a software problem. If you’re working on installed updates on your phone or firmware upgrades for your headsets, you may have to reset the headphone to make it work again.

How To Buy Bose Noise Cancelling Headphones?

Buying noise cancelling headphones is a trend these days because this kind of equipment brings you the best listening experience. Here are some factors buyers often concern when ordering Bose products.

Standard shipping for orders

Bose.com uses the United States of America Support Postal Service as its standard shipping for orders. You may find the particular carrier on your email shipment notification or by going to Orders delivered inside the continental United States. 

Express shipping can deal with orders going to Alaska or Hawaii. The majority of regular shipments arrive in about six days from the date of delivery.

Free standard shipping for orders

There are some Bose noise cancelling  headphones coming with banner free standard shipping. On the other hand, you may make mistakes with the close banner free standard. Please check the shipment option carefully if you don’t want to lose your money.

Also, pay attention to the free return shipping play_pause close banner free. 

If you have any problems with your order and want to contact local support, please visit your local site, America support site, or Bose official website to receive free return shipping quick links.

Frequently Asked Questions 

Bose users still have some problems related to the headphone connection and resetting. Here are some frequently asked questions they often have.

1. What’s the easiest way to clear my Bose headphone pairing list?

Follow the below procedures to remove your headphone pairing list:

  • Turn off your wireless headphones. 
  • Press and hold the power button for about 10 seconds until you receive the voice messages of successfully clearing Bluetooth devices.
  • Remove your Bose item from the Bluetooth pairing list on your device and reconnect.

2. Why aren’t my Bose noise cancelling headphones working?

If you’re using an Android phone, try deleting any saved Bose application data. To do so, click the Apps option in the phone’s Settings menu. Choose both “Clear Data” and “Clear Cache” from the Bose app.

3. Can I upgrade my Bluetooth version?

You can’t update your Bluetooth version to a newer one. The wireless transmitter is an element of the SOC. You won’t be able to change its hardware if it only accepts a specific Bluetooth version.

4. What causes Bluetooth device to mishap?

If any Bluetooth devices can’t pair, it’s probably because they’re out of reach or not in the pairing mode. Try restarting your devices or having your forget the Bluetooth connection if you’re facing frequent connection issues.

5. How can I make my Bluetooth device automatically connect?

Some gadgets can connect to your phone through Bluetooth without the need for a cable. Your gadgets can link automatically once you join a Bluetooth device for the first time:

  • Check to see whether Bluetooth is turning on.
  • Keep a Bluetooth device in your hand.
  • Tap the name of the device.
  • Make a new name for yourself.
  • Rename the file.

Conclusion 

Wireless listening appears to be more enjoyable than the wired method. However, problems with the Bluetooth connection may interrupt your experience.

As a result, learning how to reset Bose headphones is beneficial. You can easily enjoy your music and movies with some simple steps as mentioned above.

Hopefully, you will find this article helpful. If you need any further information, please feel free to ask. Thank you for visiting.

 HerePlus

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x