Have you heard of Skullcandy earbuds? In recent years, they are considered the best noise-canceling headphones. If you just own a set, let’s jump right into how to pair Skullcandy wireless earbuds.
At the present, smartphone manufacturers tend to remove the headphone jack, so they have inadvertently promoted the use of wireless headphones. That is a big advantage of Skull candy. Connecting the new Skull candy wireless headphones to your device can be a bit confusing. Therefore, HerePlus will try to guide you through the pairing process through this article. Let’s go find the answer right away!
How to pair Skullcandy wireless earbuds
- Activate pairing mode on your Skullcandy earbuds
- Locate your Skullcandy earbuds on your device
Before answering the ways to pair Skull candy wireless earbuds, you need to note that the following step will work with most Skull candy wireless headphones and speakers. What are you waiting for? Grab your Skull candy earbud and let’s jump right into it.
Activate pairing mode on your Skullcandy earbuds
Like most headphones on the market, Skull candy wireless earbuds have a few buttons on the side for easy customization, one of them is the Power On/Off button.
For most Skull candy headphones, the Power button also acts as a Bluetooth function trigger. However, you can also find devices that have a separate button for Bluetooth.
To activate the Bluetooth connection, all you need to do is press and hold the Power/Bluetooth button for about 5 seconds. When this feature is activated, the LED will start blinking. It suggests that the headphones are now in pairing mode
You should note that sometimes the Power On / Off button on the side of the Skull candy headset is also used to customize other modes. Therefore, you need to check your publisher’s manual to learn more about this button.
Locate your Skullcandy earbuds on your device
After you have finished activating pairing mode on your headset, you need to activate the Bluetooth connection on your device. Whether you are using a phone, laptop, or any other Bluetooth-enabled device, make sure your device is visible.
Remember that if your device is not set to visible, the Skull candy wireless earbud will not be able to locate it. The headphone should appear in the list of paired and available devices.
If you want to pair the headset with your Android device, navigate to Settings to enable Bluetooth. After selecting “Pair new device”, you will see the list of paired and available devices.
If you see the model number of your headset in that list, go ahead and click it. After that, the pairing process is complete.
For iOS devices, pairing Skullcandy wireless earbuds is the same as pairing them with Android. Simply navigate to “Settings” to enable Bluetooth, search for the model number of your headset in the “Other devices” section, and then select it.
- Windows 10
For laptops, you need to click the Bluetooth button on the toolbar. Then select “Show Bluetooth devices” and select “Bluetooth & other devices”. A list of available devices will appear, tap your Skullcandy headset to start pairing.
In case you do not find the Bluetooth button on your toolbar, go to your taskbar at the bottom of the display screen. You will surely find it below the upward arrow, then you will continue to follow the steps mentioned above.
In addition, you also have another way to find the Bluetooth function on your laptop. That is you can search for it on the Windows search box. Just select “Bluetooth and other devices” and then select your Skull candy wireless earbuds.
- Mac OS
To connect your headphones to your Mac, navigate to the Apple menu on your Mac. Then select System Preferences -> Select Bluetooth. Find your Skullcandy headset and click “Connect” to finish.
How to confirm the success of the pairing process
There are several ways for you to know that your Skullcandy headphones have been paired successfully. Maybe they will sound a beep or the LED will stop blinking.
As mentioned above, when you initiate the Bluetooth connection on the headset, the LED will start blinking. When you complete the pairing process, the LED will stop blinking.
In case you have completed the pairing steps but you do not hear the beep or see the LED stop blinking, try again from the beginning. Please reset your headset if you still have no success.
Replacing a pair of Skullcandy headphones is a seamless process between headset models. Therefore, you should read the user manual carefully to follow the correct procedure.
For most cases, to reset the headset, you need to turn off the headset, hold down the Plus and Minus buttons simultaneously and wait for the double beep sound.
In case you have problems when trying to connect your headphones, the following steps should help you fix the problem.
- Place your headphones in the charging case.
- Remove the model number of your headset from the list on your mobile phone/computer.
- Turn off Bluetooth mode on your mobile phone/computer.
- Proceed to power on your right earbud by removing it from the case. At this point, it will not be connected.
- Proceed to power off and reset your headset. When the light on the headset turns red, you are successful. If not, repeat step 5 until the light turns red. Put the right earbud back in the carrying case.
- Repeat the same steps with the left earphone. (steps 4 and 5)
- Start removing both headphones from the box so they automatically power on and start pairing with each other.
- You will hear a beep. It is a sign that the buds have paired with each other. A voice prompt will notify you that it is ready to “Pairing”. That means it is looking for your device.
- Finally, re-enable your device’s Bluetooth mode to re-pair with the headset.
Frequently Asked Questions
1. Which popular devices can I pair Skullcandy wireless earbuds with?
You can easily connect Skullcandy wireless earbuds to Android devices, IOS devices, Laptop, PC (Windows 10).
2. How do you turn on Skullcandy wireless earbuds?
All you need to do is press and hold the Power/Bluetooth button for about 5 seconds. When it is turned on, the LED will start flashing.
3. How can I reset my Skullcandy Bluetooth earbud?
Replacing a pair of Skullcandy headphones is a seamless process between headset models. However, in most cases, to reset the headset, you need to hold down the Plus and Minus buttons simultaneously and wait for the double beep sound.
4. Can I pair the Skullcandy earbud to more than one device?
Yes, They can. I tried connecting my Skullcandy Bluetooth earbuds to my computer and phone at the same time
5. Are Skullcandy wireless earbuds worth it?
Absolutely, Skullcandy wireless earbuds are always a great choice, especially when smartphone manufacturers tend to remove the headphone jack.
With the help of this article, hopefully, you will be able to pair your Skullcandy headphones with any device. Please let us know if you have any questions regarding “How to pair Skullcandy wireless earbuds“.