How To Charge Oculus Quest 2 Controllers? A Step-By-Step Guide

5/5 - (1 vote)

Those using Oculus Quest 2 will surely experience the greatness that the product brings. It is a headset with a modern and luxurious texture.

However, users have had many questions about the controller because it can run out of batteries. How to charge Oculus Quest 2 Controllers? 

This article will help you understand effectively. Let’s check it out!

The Specification 

  • Lift product dimensions 191.5 – 102 – 142.5 (folds in), 191.5 – 102 – 295.5 (for strap open)
  • The product weighs 503 g and works with built-in Oculus Insight technology.
  • The LCD screen has a resolution of 1832 × 1920
  • Memory 64g, 128g
  • Qualcomm Snapdragon XR2 chip
  • 6GB RAM
  • 3.5mm headphones corresponding audio
  • Charging time takes about 2-3 hours using the USB-C power adapter.
  • 2-3 hours of life
  • IPD 58, 63, and 68.

Might I Charge Oculus 2 Controllers? 

The answer is no. Sadly, it’s impossible to charge the Oculus 2 controller.

The product doesn’t come with a built-in one; it instead houses an AA battery holder for power transfer. But don’t worry too much about it.

Use it as often as you want because another way to save the batteries is to use the charging dock or replace the batteries with a new one. 

We recommend that you do not attempt to charge it as the AA version that comes inside is alkaline. This design can be a plus, but it also comes with a disadvantage.

How To Charge Oculus Quest 2 Controllers?

How To ChargeControllers

How To ChargeControllers 

In this section, we will show how to charge the Quest 2 with the charging dock through the following steps:

  • Step 1: Remove the cover. The product details are closely linked, so you will have a hard time finding the gap to open. 

Nothing is complicated if you are willing to learn and research. You will place your hand near the white power button on the device.

  • Step 2: Use the force of your hand to push the cover upwards. If you do it for the first time, it can take a while. 

After doing it many times, the lid will loosen and slide up easily. You will take the white cover off to show the compartment.

  • Step 3: Remove the battery by using the tip of your finger to remove the built-in one. One piece of information to smooth this step is that the pointed nail will make it easier to remove the battery. You can also use a sharp object to remove it.
  • Step 4: Insert the rechargeable one and the charging dock. You will plug the charging dock into the external charging contact point.
  • Step 5: Install the covers with the base in the original sequence
  • Step 6: Place the controller in the correct position in the charging tray and start charging. Charging time usually takes 1-2 hours. The longer you use it, the slower it will set.

Some Tips To Follow 

Bring a disposable battery.

Since your device’s battery can drain, check how long the current life lasts. To make it easier for you even on the go is to carry a spare, disposable AA battery.

Uses rechargeable AA batteries

Uses a rechargeable AA version

Uses a rechargeable AA version

You need to choose batteries of the right size and voltage for the Oculus 2 controller. One product we recommend to you is a NiMH (Nickel-metal Hydride) battery with an external charger. 

You can also use a rechargeable AA lithium version with a USB power source.

However, this type often self-discharges even when not in use. It could be due to self-discharge or the chemical nature of the lithium battery.

Battery memory

When you don’t use it often or buy the wrong cheap ones, the battery will appear to leak corrosive chemicals. It also damages the controller. 

So, if you don’t use it much, you should remove it to avoid any damage.

See more:


Are Oculus 2 controllers rechargeable?

The controller cannot be recharged from the factory. However, it might be possible if you use the Anker dock. 

Accordingly, use the dock with peace of mind because even though Anker makes it, it allows dock access to the controller.

Can I charge my Oculus 2 with my phone charger?

Using the phone charger to charge the Quest 2 depends on the power of the phone charger. You can use any electric key or cable as long as the USB charging tool is according to USB standards.

In other words, if the game has a voltage value of 5V and your phone charger must also be 5V, it will be compatible and chargeable with a USB-C connection.

Can you use any USB-C charger for Oculus?

Any good-quality USB-C cable should work with the game without difficulty. However, for a smoother and more smooth user experience, you can consider a thread at least 10ft long and USB 3.0 or higher.


Owning a controller is fantastic. You should know how to charge the game controller for long-term use; you can still choose other ways to suit your needs.

The article’s information has provided detailed steps to charge controllers and aspects related to it. I hope the above knowledge will help your life.

Thank you for reading!


0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x